YHA4 Trimming Hydraulic Press

PRODUCT APPLICATION:

 Edge trimming and shaping for all kinds of aluminum and magnesium alloy die castings.

 Most widely applied to fields like Al-mg alloy mobile phone products, automobile and motorcycle die casting parts.

 Shaping and trimming for metal or nonmetal.

The trim press, offered by us, is manufactured with qualitative components implementing sophisticated technology. It is widely used in rubber, steel and other industries owing to its highly efficient functioning, least maintenance, prolonged service and easy installation.


  • Min.Order Quantity: 1 Piece/Pieces
  • Supply Ability: 500 Piece/Pieces per year
  • Product Detail

    Our Customers

    Customers Feedback

    Exhibition

    Product Tags

     

    Item Unit Product Specifications
    YHA4-10TS YHA4-15TS YHA4-20TS YHA4-25TS YHA4-30TS YHA4-35TS
    Max.Working pressure Mpa 13 19 21 20 19 23
    Main cylinder force kN 100 150 200 250 300 350
    Max.Stroke of ram mm 300 300 300 300 350 350
    Max.Open height mm 400 450 450 500 550 550
    Middle blanking aperture size mm 150*100 150*100 150*100 200*150 200*150 250*200
    Speed of ram Down no load mm/s 260 260 230 220 200 220
    Pressing mm/s 40 38 35 30 20 30
    Return mm/s 260 260 225 220 200 210
    Effective area of working table RL(column inside) mm 450 500 500 550 550 650
    FB(edge) mm 450 500 500 550 550 550
    Overall dimension L.R mm 900 900 900 980 980 980
    F.B mm 850 850 850 900 900 900
    H mm 2105 2155 2155 2220 2270 2420
    Motor power kW 4 4 4 4 4 6
    Total weight(Approx) kg 900 950 1020 1080 1120 1400
    Oil quantity(Approx) L 150 150 150 170 170 180

     

    Item Unit Product Specifications
    YHA4-40TS YHA4-50TS YHA4-60TS YHA4-80TS YHA4-100TS YHA4-150TS
    Max.Working pressure Mpa 19 21 20 21 20 21
    Main cylinder force kN 400 500 600 800 1000 1500
    Max.Stroke of ram mm 450 450 450 450 450 450
    Max.Open height mm 600 700 700 700 700 700
    Middle blanking aperture size mm 250*200 250*200 300*200 400*250 400*250 400*250
    Speed of ram Down no load mm/s 210 205 190 190 190 190
    Pressing mm/s 20 18 15 15 15 15
    Return mm/s 200 200 190 190 190 175
    Effective area of working table RL(column inside) mm 700 800 900 1000 1000 1000
    FB(edge) mm 600 650 750 800 800 800
    Overall dimension L.R mm 1250 1340 1460 1580 1620 1680
    F.B mm 1100 1150 1220 1320 1350 1370
    H mm 2550 2750 2800 2850 2950 3150
    Motor power kW 6 11.6 11.6 11.6 16.4 16.4
    Total weight(Approx) kg 1650 2400 2900 3200 3400 3600
    Oil quantity(Approx) L 200 250 300 300 300 300

     

    11

    Advantages of our machine:

    l With Servo system

    YIHUI Hydraulic press with servo system,can bring you 10 kinds Advantages as below:

    1. Can avoid the oil leakage. Because using Servo motor, the oil temperature can be lower.

    2. English and customer country local language, bilingual operation interface, easy to operate.

    3.Can save 50% – 70% electricity energy.

    4.Parameters and Speed can be adjusted on the touch screen, easy to operate.(Machine without servo system, speed can not been adjusted.)

    5.Can be 3 to 5 years longer service life than the common machine.

    it means,if common machine can service for 10 years, then machine with servo, can use 15 years.

    6.Ensure safety and easy to know error,easy to do after service. Because of Automatic alarm and auto troubleshooting system. 

    7.Very easy to change mold, shorter time of changing mold.

    Because it have memory function,if use the original mold, do not need to adjust parameter again,

    8.Very quiet , do not have noise.

    9.Much stable than common machine.

    10.Much high precision than common machine.

    l We could supply not only custom machine,molds,robot arm(manipulator),auto feeder process technology, and other relative machines but also a full production line service.

    l The main components are imported from Japan and Taiwan . So the quality is near the Japan production, but the unit price is lower than  Japan production.

    l Our factory have specialized in independent development and producing hydraulic press for over 20 years. So the product is stable and high quality.

    l Machine body, we use bending structure , much stronger than the common welding structure .

    l Oil pipe, we use Clip-on structure , much tight than common welding structure. Prevent oil leakage.

    l We take integrated oil manifold block, much easier to check machine and repair machine.

    Quality Control

    All of the hydraulic presses in our factory have passed CE,ISO,SGS,BV certificates.

    Technical Features

    1. Using built-in high speed cylinder, has fast falling speed and high production efficiency.
    2. Four columns are made of high-strength alloy steel with hard chrome plated surface and good abrasion resistance.

    3. Pressure, stroke and pressurizing time can be adjusted according to processing requirement.

    4. Optional configuration: protective shield, anti-drop device, blowing and removing scraps device, LED lighting and infrared grating, etc.

    Applicable Scope

    1. Vents trimming and shaping for all kinds of aluminum alloy die castings and magnesium alloy die castings.
    2. Most widely used in fields like aluminum magnesium alloy mobile phone products, automobile and motorcycle die casting parts, etc.
    3. Shaping and punching for metal or nonmetal parts.Center Blanking

    Center Blanking

    Side Blanking

    Protective Shield

    Automatic robots can be used to operate for the large worktable machine. 


  • Previous:
  • Next:

  •  

    3

    Why so many famous brand company cooperate with us ?

    1.Our factory have specialized in  independent development and producing hydraulic press for 19 years. So the product is stable and high quality.

    2. Machine body, we use bending structure , much stronger than the common welding structure .

    3. Oil pipe, we use Clip-on structure , much tight than common welding structure. Prevent oil leakage.

    4. We take integrated oil manifold block, much easier to check machine and repair machine.

    5.The main components are imported from Japan and Taiwan .    So the quality is near the Japan production, but the unit price is lower than  Japan production.

    6.Our factory can offer full set line service, such as the mould,process technology, and other relative machines.

     

    4

    Certificate

    2

    1

    YIHUI Hydraulic press with servo system,can bring you 10 kinds advantages as below:

    1.Can avoid the oil leakage. Because using Servo motor, the oil temperature can be lower.
    2.English and customer country local language, bilingual operation interface, easy to operate.
    3.Can save 50% – 70% electricity energy.
    4.Parameters and Speed can be adjusted on the touch screen, easy to operate.
    (Machine without servo system, speed can not been adjusted.)
    5.Can be 3 to 5 years longer service life than the common machine.
    It means,if common machine can service for 10 years, then machine with servo, can use 15 years.
    6.Ensure safety and easy to know error,easy to do after service.
    Because of Automatic alarm and auto troubleshooting system.
    7.Very easy to change mold, shorter time of changing mold.
    Because it have memory function,if use the original mold, do not need to adjust parameter again,
    8.Very quiet , do not have noise.
    9.Much stable than common machine.
    10.Much high precision than common machine.

  • Write your message here and send it to us