Fully automatic mechanical powder compacting press
product detail
Mechanical powder machine
Product Specifications
| Parameter name | 单位 | 规格 |
| Maximum pressing force | KN | 300 |
| Maximum modulus of force | KN | 180 |
| Maximum loading height | MM | 90 |
| Max out die stroke | MM | 60 |
| Upper slider stroke | MM | 125 |
| Upper slider adjustment range | MM | 50 |
| Forming times | N | 8-25 |
| More; less fill stroke | MM | 3 |
| Main motor power | KW | 5.5 |
| Final compression stroke | MM | 0-20 |
| Female die suface adjustment | MM | ±5 |
| Power Supply | 380V、3相50HZ | |
| Compressed air consumption | L/min | 55 |
| Negative template under pressure | KN | 150 |
| Double uprush inner punching capadily | KN | 150 |
| Double red outside the red bear | KN | 300 |
| A lower tolerance | KN | 300 |
| Two lower affordability | KN | 150 |
| A lower amount of adjustment | MM | 0-60 |
| Two undershoot adjustment | MM | 0-60 |
| Mandrel bearing force | KN | 150 |
| Punch fixing seat capacity | KN | 300 |
| A lower block adjustment | MM | 0-20 |
| Two lower block adjustment amount | MM | 0-20 |
| Weight of whole machine | T | 3.2 |
| Parameter name | unit | GX60T | GX100T |
| Maximum pressing force | KN | 600 | 1000 |
| Maximum modulus of force | KN | 300 | 500 |
| Maximum loading height | MM | 110 | 115 |
| Max out die stroke | MM | 65 | 70 |
| Upper slider stroke | MM | 160 | 160 |
| Upper slider adjustment range | MM | 80 | 80 |
| Forming times | N | 6-18 | 6-18 |
| More; less fill stroke | MM | 5 | 5 |
| Main motor power | KW | 7.5 | 15 |
| Final compression stroke | MM | 0-25 | 0-25 |
| Female die suface adjustment | MM | 士5 | ±5 |
| Power Supply | 380V、3相50HZ | 380V、3相50HZ | |
| Compressed air consumption | L/min | 80 | 120 |
| Negative template under pressure | KN | 300 | 500 |
| Double uprush inner punching capadiy | KN | 300 | 500 |
| Double red outside the red bear | KN | 600 | 1000 |
| A lower tolerance | KN | 600 | 1000 |
| Two lower affordability | KN | 300 | 500 |
| A lower amount of adjustment | MM | 0-80 | 0-80 |
| Two undershoot adjustment | MM | 0-80 | 0-80 |
| Mandrel bearing force | KN | 150 | 180 |
| Punch fiuing seat capacity | KN | 600 | 1000 |
| A lower block adjustment | MM | 0-20 | 0-20 |
| Two lower block adjustment amount | MM | 0-20 | 0-20 |
| Weight of whole machine | T | 7.5 | 12 |
| Parameter name | unit | 160T |
200T | 260T | 320T | 400T | 500T |
| Maximum pressing force | KN | 1600 | 2000 | 2600 | 3200 | 4000 | 5000 |
| Maximum modulus of force | KN | 800 | 1000 | 1300 | 1600 | 2000 | 2500 |
| Maximum loading height | MM | 150 | 150 | 150 | 150 | 150 | 150 |
| Max out die stroke | MM | 100 | 100 | 100 | 100 | 100 | 100 |
| Upper slider stroke | MM | 180 | 190 | 190 | 200 | 210 | 225 |
| Upper slider adjustment range | MM | 85 | 90 | 90 | 90 | 90 | 90 |
| Forming times | N | 6-18 | 5-15 | 5-15 | 5-15 | 5-15 | 5-15 |
| More; less fll stroke | MM | 8 | 8 | 8 | 8 | 8 | 8 |
| Main motor power | KW | 22 | 30 | 37 | 45 | 50 | 60 |
| Final compression stroke | MM | 0-40 | 0-40 | 0-40 | 0-40 | 0-40 | 0-40 |
| Female die suface adjustment | MM | ±8 | ±12 | ±12 | +12 | ±12 | ±12 |
| Power Supply | 380V、3相50HZ | ||||||
| Compressed air consumption | L/min | 130 | 150 | 180 | 250 | 300 | 360 |
| Negative template under pressure | KN | 800 | 1000 | 1300 | 1600 | 2000 | 2500 |
| Double uprush inner punching capadily | KN | 800 | 1000 | 1300 | 1600 | 2000 | 2500 |
| Double red outside the red bear | KN | 1600 | 2000 | 2600 | 3200 | 4000 | 5000 |
| A lower tolerance | KN | 1600 | 2000 | 2600 | 3200 | 4000 | 5000 |
| Two lower affordability | KN | 800 | 1000 | 1300 | 1600 | 2000 | 2500 |
| A lower amount of adjustment | MM | 0-100 | 0-85 | 0-85 | 0-110 | 0-110 | 0-110 |
| Two undershoot adjustment | MM | 0-100 | 0-85 | 0-85 | 0-110 | 0-110 | 0-110 |
| Mandrel bearing force | KN | 200 | 200 | 260 | 300 | 400 | 500 |
| Punch fixing seat capacity | KN | 1600 | 2000 | 2600 | 3200 | 4000 | 5000 |
| A lower block adjustment | MM | 0-20 | 0-20 | 0-20 | 0-20 | 0-20 | 0-20 |
| Two lower block adjustment amount | MM | 0-20 | 0-20 | 0-20 | 0-20 | 0-20 | 0-20 |
| Weight of whole machine | T | 18 | 26 | 30 | 38 | 45 | 55 |
Features：
●Adopt advanced computer touch screen operation, implement human-computer dialogue, and realize automatic adjustment of various functions. All adjustments are centrally controlled by the computer, which can store and recall process data of more than 100 products. Easy to operate and reduce labor intensity.
● Using a new C-type mold base (two upper, three lower), the inner and outer sides of the double upper punches can be mechanically adjusted, and the comprehensive filling mechanism performs filling to a certain extent, which can make up for the molding defects of complex or special-shaped pressed parts. (Special upper, three and lower four mold bases may be required)
● The comprehensive filling mechanism and pressing pressure adjustment device can maintain complex shapes and ensure the pressing effect. It implements initial pressure (upper punch insertion) and two-way pressing, upper punch pressurization and female mold floating (the female mold, first punch, and second lower punch can all float), and finally pressurized and ejected. And the parts are produced by the robot and the powder is automatically loaded.
● The mold ejection position and mold loading position are fixed.
Production parts